Tải file chứng nhận tại đây
JAPAN PLUS VN CO., LTD
SAFETY DATA SHEET Product: APET CLEARNORMAL
Printed date: 16/05/2022
Section 1: Chemical Product and Company Identification
Trade Name : APET SHEET
Chemical Name : AMORPHOUS POLYETHYLENE TEREPHTHALATE SHEET
Chemical formula : Polyethylene terephthalate (C10H8O4)n
Cas No. : 250388-59-9
Industry Sector : Plastic processing industry
END Uses : Vacuum forming, Thermoforming, Cut sheet
Company Identification : JAPAN PLUS VIET NAM Co., Ltd Manufacturer‟s
Address : Lot A7-1, Road D8, Dong Nam IP, Binh My Commune, Cu Chi Dist, HCM city, Viet Nam
Tel: +84-28-37351000
Fax: +84-28-37351200
Section 2: Composition / Information on Ingredient
Main Ingredients |
: Polyethylene Terephthalate |
> 97.0 Wt % (Cas No.: 25038-59-9) |
Additives |
: Trace |
< 3.0 Wt % |
Section 3: Hazards Identification
This product has not been tested „as is‟ . The information provided on the health effects of this product is based on data on the individual components.
No particular hazards known.
The relevant minimum standards for protective measures in the plastic manufacturing should be observed.
Section 4: First Aid Measures
Ingestion : Unlikely to be required, but if necessary, treat symptomatically,
Eye Contact : Remove the product and rinse thoroughly with water. If easy to do, remove contact lenses.
Skin Contact : After contact with molten product, cold quickly with cold water. Do not pull solidified product from skin, take for medical treatment.
Inhalation : If symptomatic, move to fresh air. Get medical attention if symptoms persist.
Section 5: Fire Fighting Measures
Suitable extinguishing media : Water spray, Dry chemical, Foam
Special fire fighting instruction : Wear self-contained breathing apparatus and protective clothing.
Hazardous Combustion Products : Carbon dioxide (CO2) and carbon monoxide (CO) Extinguishing media that must NOT used for safety reason : Full water jet
Section 6: Accidental Release Measures
When picked up and swept up, treat material as prescribed under heading “Disposal”. Dispose of in accordance with local regulations.
Section 7: Handling and Storage
Precautions for safe handling: Ensure good general ventilation in the workplace; local exhaust ventilation may be necessary as and when required.
Prevention of fire and explosion: Keep away from oxidizing materials and take precautions against accumulation of electrostatic charge.
Condition for safe storage: Store materials sheltered in a cool and well-ventilated place. Keep away from moisture, heat and source of ignition.
The material has shelf life of 3 years.
Section 8: Exposure Control and Personal Protection
Unlikely to cause harmful effects under normal conditions of handling and use. General protective measures: Observe the usual precautions for handling solid materials.
Hygiene measures: The usual Industrial Hygiene precautions must be taken during work, in particular: do not drink, eat or smoke during the handling of product; clean hands and face during work interval and after work.
Eye/ Face protection: Wear Safety Glasses to prevent any eye contact when necessary.
Skin/ Hand protection: Wear Leather Gloves, Nitrile Rubber Gloves etc. as and when the particular working conditions required.
Respiratory protection: In case of insufficient exhaust ventilation or prolonged exposure, use respiratory protection equipment.
Recommended decontamination facilities: Eyewash, shower and standard washing facility.
Section 9: Physical and Chemical Properties
Physical form : Solid
Colour : Clear
Odour : Odourless
Solubility (in water, ambient temperature) : Insoluble
Boiling Point (oC) : Not applicable
Melting Point (oC) : 235 ~ 265 oC
Vapour Pressure (mm of Hg at 25 oC) : Not applicable Percentage
Volatiles : Not applicable
Evaporation Rate : Not applicable
Vapour Density : Not applicable
Specific Gravity : 1.33 ~ 1.40
Flash Point (oC) : 440 oC
Auto-ignition Temperature : None
Flammable limit (%) : Not applicable
Food Contact : Approved
Section 10: Stability and Reactivity
Stability : Stable under normal conditions
Incompatibility (Materials to avoid) : Strong oxidizing agent
Combustion products : Carbon dioxide, Carbon monoxide
Thermal decomposition : Acetaldehyde, Ethylene
Hazardous polymerization : Will not occur
Section 11: Toxicological Information
Toxicity data : None
Carcinogenicity : None
Reproductive effect : None
Effects of overexposure : None
Chronic effects : None
Target organs : None
Medical conditions generally aggravated by exposure : None
Section 12: Ecological Information
Mobility : Will slowly degrade with exposure to UV light.
Bioaccumulation : No data available
Biodegradability : No data available
Aquatic toxicity : No data available
Section 13: Disposal Consideration
To follow local regulations regarding disposal.
Section 14: Transport Information
Any international and national regulatory requirements: None
Packaging information : Using paper core and pallet.
Any other special requirements : None
Transportation : By land transport or sea transport or air freight.
Section 15: Regulatory Information
User : Not classified as hazardous to users
Transport : Not classified as hazardous for transport
Section 16: Other Information
Workers using APET sheet should read and understand this MSDS and be trained in the proper use of this material.
For other technical information, please contact Japan Plus Viet Nam Co., Ltd.
Address :Lot A7-1, Road D8, Dong Nam IP, Binh My Commune, Cu Chi Dist, HCM city, Viet Nam Tel: +84-28-37351000
Fax: +84-28-37351200
The data are based on the current state of our knowledge and are intended to describe the product with regard to the requirements of safety. The data should not be taken to imply any guarantee of a particular or general specification. It is the responsibility of the user of the product to ensure his satisfaction that the product is suitable for the intended purpose and method of use. We do not accept responsibility for any harm caused by the use of this information. In all cases, our general conditions of sale applied.